Segmented Gauge

The <ch5-segmented-guage> component is used to display feedback from an analog join by scaling the analog value on a touch screen instead of via control system programming.

For interactive examples using the <ch5-segmented-gauge> component and CSS classes, refer to the Showcase Application.

Features

The <ch5-segmeneted-gauge> attributes provide the following features:

Allows a digital join to send a value to the control system. The value goes high when a user presses on the gauge and goes low when the press is released. Repeat digital joins are not supported.
Allows an analog join to receive feedback from the control system. If no join is selected, the position of the gauge does not change.
Controls whether or not the gauge is touch settable.
Sets the number of segments displayed on the gauge (the maximum is 50).
Set a minimum and maximum analog value to reflect the lowest and highest points of the gauge, respectively.

Design Considerations

For programmers coming from VT Pro-e® software, the segmented gauge component in CH5 behaves differently than the segmented gauge in VT Pro-e and will require different programming.

Have feedback on this document? Contact docfeedback@crestron.com.

All brand names, product names and trademarks are the property of their respective owners. Certain trademarks, registered trademarks, and trade names may be used to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice.